Close
Piedrujas street 11, ofiss 214, Riga, Latvia, LV-1073
Mon.-Fri. 9.00-18.00, Sat.-Sun. closed

MAHR Precimar Gage Block and Dial Gage Testing Unit

  • Gage Block Comparator
  • Long range indicator checker
  • Fully automated dial indicator test bench
Ask Question

Description

Precimar 826 PC Gage block comparator

The 826 PC gage block measuring instrument is quick, reliable and highly accurate. An open and extremely rigid L-shaped stand forms the base for the two counteracting precision measuring probes and the measuring table.

MAHR Precimar 826 PC Gage block comparator

  • Rigid cast stand for temperature stability and heat resistance
  • Fast adjustment of vertical slide with top probe
  • Highly ergonomic, user friendly one-handed operation to position the gage blocks under the measuring probe
  • Precision adjustment via torsionally rigid parallelogram springs
  • Electropneumatic lifting of measuring probes
  • Precision ball bearing guides for smooth manipulator actuation
  • No influence on measurement from hand force
  • Round carbide precision support pins make it easy to move the gage blocks on the measuring table
  • Set value linked to the stored actual deviation of the reference gage block, avoiding the need for zero point setting

With QM-Block software:

  • Flattening correction
  • Correction of differing coefficients of expansion
  • Mean value generation

Precimar 130B-24 Gage block comparator

The 130B-24 and 130B-16 gage block measuring instruments from Mahr are the first choice for many large calibration laboratories. They are designed for comparative measurements of gage blocks.

MAHR Precimar 130B-24 Gage block comparator

  • A unique ‘floating measuring frame’ ensures exact point-to-point measurement
  • Single sensor design for minimal electronic noise
  • Precision balanced system for optimum adjustment of measuring forces
  • Integrated measuring software and user interface
  • Built-in positioning device for reproducible measuring positions

 

 

Precimar ICM 25 Long range indicator checker

The Precimar ICM 25 is the most cost effective test station for manual testing of digital and dial indicators, dial test indicator measuring devices as well as inductive and incremental measuring probes.

ICM 25 Long range indicator checker

  • Testpiece held by a vertical guide. Fast height adjustment to adapt indoicators according to the measuring range
  • Rigid, box-shaped device housing
  • For measuring objects with 8 mm, 3/8” shaft diameter
  • All control elements are ergonomically arranged
  • Complies with Ernst Abbe’s comparator principle for maximum measuring accuracy
  • MarCeck display unit with large clearly readable LCD monochrome difital display 8240×160 pixels) with background illumination with 13 mm/ .512″ high digits
  • User selectable for either inch or metric

 

Precimar ICM 100 IP Fully automated dial indicator test bench

With the Precimar ICM 100 IP, the testing of indicators and comparators has become automated and efficient. The simple, one-handed usability and the clever operating software make the Precimar ICM 100 IP the perfect measurement solution for inspection rooms, calibration labs, and routine series testing. Never before has it been so efficient to measure indicators and comparators. With the Precimar ICM 100 IP, reduce measurement time by over 60% thanks to faster image processing, easy-to-use software, and simpler handling.

Precimar ICM 100 IP Fully automated dial indicator test bench

  • Convenient, tool-free and intuitive operation with just one hand
  •   Highest-accuracy measurement through compliance with Abbe‘s principle
  •   Testing to international standards, including ASME/ANSI, DIN, BS, JIS, VDI, GOST and NF.
  •   High-performance USB 3.0 industrial camera with high image quality and wide dynamic range
  •   Robust, industrial-grade LED ring light for measurements unaffected by ambient light
  •   Ability to automatically measure digital indicators through direct reading of values – no cables required
  •   Wide variety of possible test specimens up to 4 Inches / 100 mm – dial & digital indicators, comparators, test indicators
  •   Pre-programmed measurement modules with pre-loaded nominal values and tolerances
  •   Direct measurement range of 4 inches / 100 mm – no need to reposition the test specimen during testing

 

Precimar 826 PC

Technical data

Stylus ball radius, lower probe
1.5 mm
Stylus ball radius, upper probe
1.5 mm
Stylus radius, lower probe
1.5 mm
Mounting hole for probe
8 mm
Application range mm
0.5 to 170
Direct measuring range [mm]
0,2
Repeatability [µm]
± 0,01
Mass [kg]
37
Table surface (A x B) mm
60 mm x 55 mm

Applications

  • Quick and easy high precision testing of European and US gage blocks up to 170 mm in length, as per ISO 3650

 

Accessories

  • QMSOFT® / QM-Block calibration software for the calibration and data management of gage blocks and gage block sets
  • The evaluation program runs under Windows 7 Ultimate.
  • Excellent thermal insulation with wraparound acrylic glass screen
  • 826 Va HS lifting device for fast and quiet pneumatic lifting of inductive probes via foot switch
  • Temperature compensation
  • Pincers, gage block suction lifter, optical flat, lay-on thermometer

 

Precimar 130B-24

Technical data

130B-24 / 130B-16
130B-24 / 130B-16
Stylus ball radius, lower probe
3 mm
3 mm
Stylus ball radius, upper probe
3 mm
3 mm
Stylus radius, lower probe
3
3
Application range mm
0.25 to 100
0.25 to 600
Direct measuring range [mm]
± 0.01
± 0.01
Repeatability [µm]
6ϭ < 0,025
6ϭ < 0,025
Mass [kg]
100
140

 

Applications

  • Quick and easy high precision testing of European and US gage blocks

 

Accessories

  • For further information please see our separate brochure

 

Precimar ICM 25

Technical data

Measuring uncertainty MPEE1 (L in mm) [µm]
± 0.2

 

Applications

For testing of:

  • Dial indicators (analog and digital)
  • Dial comparators (analog and digital)
  • Dial test indicator measuring devices (analog and digital)
  • Inductive and incremental probes

 

Precimar ICM 100 IP

Technical data

Digital numerical increment [µm]
0.02
Measuring uncertainty MPEE1 (L in mm) [µm]
≤ (0.2 + L/250)
Mass [kg]
45

 

Applications

  • Calibration of dial indicators, dial test indicator measuring devices and dial comparators
  • The Precimar MSW 100 software system controls the dial indicator test device, processes the camera image (pointer or numeric display of the test object) and the reference measuring values of the dial indicator test device, and also performs all the subsequent processes related to test equipment management.
  • The testing routine can be implemented based on DIN, VDI, DKD or DAkkS guidelines, various international standards, or based on the company’s internal specifications.
  • Deviations between test objects are illustrated in a graph during testing.

 

Shipment

  • Precimar ICM 100 base device
  • Precimar IP 100 upgrade kit image processing
  • Software Precimar MSW V12
  • Software option Precimar ICM IP image processing
  • USB cable
  • Clamping 8 mm
  • Mount for dial test indicators
  • Mahr calibration certificate
  • Operating manual